IGBT 20-200A 110/220V Inverter Arc Electric Welding Machine MMA/ARC Welders for Welding Working and Electric Working
Rated input current: 10.6A
Phase number: single-phase 110-240 V
Current adjustment range: 20-200 stepless adjustment
Rated input voltage: 220 V ± 10%
Voltage without load: 65
V Rated frequency: 50/60 Hz
Loss without load : 40 W
Rated load: 35%
Insulation class: F
Rated output voltage: 28 V
Cooling method: forced air cooling
Please leave a message to tell us whether it is 110 V or 220 V. If there is no message, We will send 220V by default.
1x Arc Welder 2x Fast Plug
Quick -plug 1 x Key, 1 inch Gloves 1 x Welding helmet 1 x Copper nose 1 x Grounding clamp 1 x Power connector 1x6 m Special cable 1 x Welding pliers 1 x 2 m ground wire 1 x 3 m welding wire 5 x welding electrode
1 x welding clamp (3 m line) 1 x Grounding clamp (2 m line)
2 x quick plug
1 x key, inch standard
1 x Gloves
1 x Welding helmet
1 x Copper nose
1 x Grounding clamp
1 x power connector
1x6 m special cable
1 x welding pliers
5 x welding electrode
Amorphous structural transformer. Lightweight and miniature, it is smaller than other cores.
- High quality capacitor. Special large electrolytic capacitor for the welding machine, high capacity and high heat resistance, long service life, 85 ° C full load can work for more than 20 hours, without obvious attenuation.
-New control technology switching board. Dustproof, waterproof, anti-aging, anti-conductive, reducing machine failure rate.
-IGBT Monotube. With a service life of more than 10,000 hours, it is more efficient, longer and more stable than other single tubes.
Increase the radiator.
Rated Duty Cycle:35%
Pilot Arc Current:20-200A