Automatic Soap Dispenser Pump Infrared Sensing Stainless Steel Liquid Soap Holder Shampoo Dispenser Bathroom Liquid Foam Pump

$28.17 USD

1846 In Stock


Features:1. Using infrared body sensing technology.2. Automatic human hand sensing fluid to avoid secondary cross infection.3. Energy saving, 4 AAA alkaline batteries can be used for about 6 months.4. The shape design is exquisite and compact, and it is a beautiful accessory for home.

Operation instructions: 1. Unpack and remove the product, open the battery compartment at the bottom of the fuselage, and load 4 AA (1.5) alkaline batteries (1.2V rechargeable battery is not available) in the positive and negative directions, then cover the battery. Warehouse cover 2. Press and hold the switch button on the head of the fuselage for 3-4 seconds. After observing that the indicator light flashes once, release the switch button, the indicator light is off and there is no long time to light up. At this time, the representative has turned on and entered the normal working state; (If the indicator light is always on after releasing the switch button, do not proceed to the next step, contact customer service for help.) 3. At this time, do not add liquid first, put your hand under the “liquid outlet”, observe whether the indicator light will be on, and with the sound of pumping liquid, the pumping sound stops and the handle is removed. The indicator light goes out, then put it back under the liquid outlet, repeat 3-4 times to see if the indicator light will be on every time and there is a sputum pumping sound; 4. After the operation is normal according to the third point, press and hold the switch button for 3-5 seconds until the indicator light turns red. At this time, the machine has been turned off, and the base is aligned with the bottom of the fuselage. Straight on a flat surface; 5. Rotate the lid of the liquid filling port of the fuselage and open it. Add the liquid you need to put in. During the adding process, pay attention to the filling port. Do not add the liquid to the outside, until the liquid surface is observed. The liquid port can be stopped at 3-5 cm, and the lid is placed back and tightened; 6. Repeat step 2 for the power on, then repeat the step at point 3?? Multiple inductions until the liquid comes out? (The first time you need to operate several times to get the liquid out, because the liquid is pumped to the liquid outlet. Have an empty trip); Frequently Asked Questions (FAQ): Q: What is the size of the product? A: 250ml soap dispenser: stainless steel body diameter 60mm, with base diameter 70mm, height: 105mm (Manual measurement, there may be a deviation of 1-2cm) Q: Why do I not press the power button after installing the battery? A: The battery is installed incorrectly. Open the battery compartment. Please take out the battery and reposition it against the positive and negative terminals of the battery. Q: Why do I put my hand in the sensing area after turning it on? A: Please see the sixth point of the operation instructions above. It is necessary to try several times for the first discharge until the liquid is discharged. Q: Why does the indicator light flash once after a while? A: After the normal power on, the red indicator will flash once every 5-7 seconds in the standby state. This is normal. Q: How to adjust the amount of fluid? A: Short press the switch button to adjust the liquid output, the indicator light will flash shortly. There are 3 gears in total. The first gear will flow out the liquid for 1.5 seconds, the second gear will be 2 seconds, and the third gear will be 2.5 seconds. You can adjust to different gears by pressing the “Power Switch”. Q: Does the product need to be shut down every day? A: This product consumes a small amount of electricity. It does not need to be turned on and off every day. If you need to go out for a long time, it is recommended to shut down. Q: How long does the four-cell battery last? A: Depending on the battery brand you use, there are daily usage frequencies and gear sizes. Q: The base of the product is ugly. Can you use the base? A: This product must be installed with the base when it is used. Because the battery compartment is placed on the bottom of the fuselage and placed directly on the countertop, it is easy to cause water ingress and damage the product. Q: How to shut down? A: Press and hold the switch for 3-5 seconds until the red indicator light goes out, then release the switch. Q: You can use facial cleanser and shower gel inside. . . . . ? A: This baby is limited to medium viscosity liquids, containing solid particles, semi-solid, gelatinous, high viscosity, corrosive, volatile liquids are prohibited. Q: Can the foam hand soap be used? A: Normal medium viscosity liquid can be used. This baby comes out of liquid and cannot be foamed. Precautions: 1. When the liquid level is low, immediately add the hand sanitizer, otherwise the hand sanitizer will not flow normally; 2, hand sanitizer can not be mixed with water to join the machine container, otherwise it will affect the normal discharge of the machine; 3. Do not apply strong impact to the machine, otherwise it will cause serious damage; 4. If the unit is not used for a long time, please turn off the power switch and remove the alkaline battery; 5, normal use, replace the battery, please do not tilt or invert the fuselage when adding liquid, so as to avoid leakage of hand sanitizer; 6, this product is only suitable for use in the bathroom and kitchen; 7. Do not rinse the body with water, otherwise it will cause damage to the product; 8. Do not use this product in a sunlit environment, otherwise it will affect the function of the product; 9, the normal use of the machine ambient temperature: 3 ° C ~ 40 ° C

Liquid three-range liquid volume adjustment:                                                  1. One file: Press the switch once, the indicator light flashes once, and the liquid output is small.                                                                                          2. Second gear: Press the switch twice, the indicator light flashes twice, and the liquid output is medium.                                                                        3, third gear: press the switch three times, the indicator light flashes three times, the liquid output is large. note:

1. When the liquid level is low, immediately replenish the hand sanitizer, otherwise the hand sanitizer will not flow out normally.

2. Hand sanitizer should not be mixed with water and added to the container of this machine, otherwise it will affect the normal discharge of this machine.

1, the liquid comes out of the problem: the liquid is too full, the inner liner is not waterproof, it will flow to the bottom.

2, the problem of liquid discharge: the liquid is too thick to easily block the tube, if it is blocked, the liquid will be washed out and then used.

3, induction problem: the battery should be new, the bottom can not leak into the water, put it in a dry place.

4, induction lamp: the bottom lamp can not touch the water, so it is easy to short-circuit burnt, the lower sensor light is broken, it can not get liquid


Type: Liquid Soap Dispensers
Feature: Liquid Soap Dispenser
Liquid Soap Dispenser Type: Automatic Soap Dispenser
Main Material: Metal
Metal Liquid Soap Dispenser Finishing: Chrome
Model Number: zy439
Material: 201 stainless steel
Installation mode: Station
Sensor: Infrared sensing
Volume: 250ml
Power: Four AAA batteries
Size: 19* 11* 7.5 CM
Feature: Led light

Recently Viewed Products